Additional Information
Collar sizes: 17 – 114,3 mm / NS 3/8” – 4″
Run tube size: 33.7 – 273 mm / 1″ – 10″
Pipe material: Stainless steel, steel, copper, and aluminum manifold production.
Machine type: Industrial machines
Process: Collaring
Most commonly used in:
T-DRILL Fully Automatic Collaring Machine SEC-115 with automatic tool changer for five different collaring tools makes the production of manifolds with multiple collar diameters easier, faster, and more productive than ever before. SEC-115 is suitable for stainless steel, steel, copper, and aluminum manifold production.
The high-speed SEC-115 operates by moving according to the program along the tube length, while the pipe is rotated when needed.
The SEC-115 has a fully automatic collaring cycle:
1. Pilot hole milling
2. Collar forming and
3. Trimming for the collars to be welded
While the pilot hole milling unit works, the collaring unit collects simultaneously the correct collaring tool from the magazine and starts collaring instantly when the pilot hole is ready. The collaring tool is adjusted automatically according to the programmed collar diameter, so no manual tool adjustment is needed.
SEC-115 made this manifold in less than 10 minutes.
Stainless steel manifolds especially with multiple collar diameters.
Potential industries for SEC-115
If you are interested in receiving a customized offer, you can find our contact information at the link below.
You can also send a pipe specification sheet through our contact form.
COMPARISON: Welded Fittings vs T-DRILL Collaring & Flanging
CUT COSTS, IMPROVE EFFICIENCY, AND SAVE A MILLION PER YEAR WITH T-DRILL METHOD.
Use the calculator to see how much you can save with T-DRILL method.
| SEC-115 | Collaring of Steels |
|---|---|
| Collaring range | 17 – 114,3 mm / NS 3/8” - 4" |
| Run tube size | 33.7 – 273 mm / 1" – 10" |
| Rated power | 15 kW |
Note! The above values are intended as a guidance only.
Share on social media
