TCC-50 RL & COIL
Boru çapları: Ø1,5–22 mm, 8–50,8 mm | .060″ – 0.866”, 0,315″ – 2″
Boru malzemesi: Alüminyum, Bakır, Paslanmaz çelik, Çelik
Makina tipi: Endüstriyel makinalar
Proses: Kesme
Pahalı testere bıçaklarına ihtiyaç yoktur
Kesme işlemleri arasında malzeme kaybı yoktur
800-2000 tube pieces per hour
TCC-50 RL & BOBIN BORU KESME TEZGAHI
If you need to cut tubes from both coil and from rackloading systems for straight length tubes, this machine is the optimum solution, offering both capabilities.
With this machine you can cut straight tube diameters 6–45 mm (¼’’ – 0.866”) and coil tubes 1,5–22 mm (0.06” – 0.866’’) in a range of materials such as copper, aluminum, stainless steel.
Typical application areas are in automotive and heat exchanger industry, etc. where good cutting quality and superior production speed are needed.
TEKNIK BILGI
| Mains supply | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
| Cutting range | From coil: Ø1,5–22 mm | Ø0.06'' – 0.866’’ Straight tubes: Ø6–45 mm | Ø0.236'' – 1.772'' |
| Wall thickness | From coil: 0,3–3 mm | 0.012'' - 0.12'' Straight tubes: 0,.4–2,5 mm | 0.016'' - 0.1'' (depending on the tube material) |
| Material | Copper, Aluminium, Steel, Stainless Steel, CuNi, Brass |
| Repeating accuracity | +/- 0.1 mm/stroke |
| Min. cut lengths | 3 x O.D. |
| Typical production rates | 800–2200 pcs/h depending on cut length, material and required cut quality |
| Main fuse | Min. 3 x 16A Maks.3 x 63 A |
| Noise level | 80 dBA |
Not! Yukarıdaki değerler sadece rehberlik amaçlıdır.
