Additional Information
Collar sizes: 168–880 mm
Run tube sizes: 254–1430 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring
Most commonly used in:
Collaring by T-850 collaring machine is based on the patented T-DRILL-method. Both hot and cold forming procedures are possible. By cold forming it is possible to make collars in materials with cold forming properties, e.g. stainless steel pipes. Hot forming is used for mild steel pipes or aluminium alloy pipes. For hot forming the machine is quipped with heater arm and necessary control devices.
T-850 machine is semi-automatic: collaring, trimming and bevelling are made by an automatic work cycle, other functions are made manually by using push-buttons.
The machine is used in e.g. SF6 Gear Switch applications.
Did you know about the T-850?
If you are interested in receiving a customized offer, you can find our contact information at the link below.
You can also send a pipe specification sheet through our contact form.
CUT COSTS, IMPROVE EFFICIENCY, AND SAVE A MILLION PER YEAR WITH T-DRILL METHOD.
Use the calculator to see how much you can save with T-DRILL method.
| T-850 | Value |
|---|---|
| Collar diameter | 168–880 mm |
| Diameter of the tube to be collared | 265–1430 mm |
| Max wall thickness | See capacity charts |
| Materials to be collared | Stainless steel, Mild steel, Aluminium |
| Compressed air supply | 6–7 bar |
| Air consumption | 3 Nm3/h |
| Connected power | 51 kW |
| Size of fuses | 3 x 250 A |
| Dimensions of the unit | Depends on tube handling equipment; see also layout drawing |
| Weight | ~ 27 000 kg |
Note! Above values are intended as a guide only.
Share on social media
