The Schweissen & Schneiden fair was a great success, with a huge amount of visitors from all around the world. Let the pictures tell you more.

WP_20170925_15_42_14_Rich

sdr

sdr

 

T-DRILL Collaring machine S-80

T-DRILL flanging machine S-170

T-DRILL Chipless cutting machine TCC-28

T-DRILL collaring machine S-54 and dimpling device Power Notcher PND-54

T-DRILL portable collaring tools

sdr

cof

WP_20170925_16_57_11_Rich

WP_20170925_17_46_12_Rich

T-DRILL is the globally leading provider of tube and pipe fabrication solutions. For decades, T-DRILL has kept developing solutions for diverse applications in many industries, resulting in countless success stories in more than seventy countries. You can make collars, cut to length, and form tube ends with the T-DRILL technologies faster and more accurately than with any other method – saving time, money, and material.

T-DRILL will be exhibiting at Schweissen & Schneiden fair 25–29.9.2017 in Düsseldorf, Germany. Welcome to visit Hall 14, Stand No. H06 to see the latest innovations and witness our slogan “PRODUCTIVITY AS A PRODUCT” in action!

T-DRILL’s latest innovations

Collaring Machine S-80

New Industrial T-DRILL Collaring Machine S-80

One of the latest T-DRILL innovations is a new highly effective collaring machine S-80 for butt welded branching of tubes. The S-80 machine has fully automatic collaring cycle: Pilot hole milling, collar forming and finally trimming of the collar.

The machine has been developed for thin walled tubes to make collars between 10–80,0 mm faster than ever before, which makes it a perfect solution for high volume applications while our traditional collaring machines are able to make perfect collars on heavy wall tubes.

T-DRILL collared and flanged stainless steel pipe

Flanging machine F-170

T-DRILL new Flanging machine F-170

Another release is the second generation of the Flanging machine F-170. This machine is easy to move from one place to another and fits perfectly for job site or pipe fabrication shop.

The working cycle is fully automatic without any tool changes. The F-170 is suitable for pipe diameters 26,9–168,3 mm, PN16 Sch. 10.

Power Notcher PND-54

T-DRILL_Power_Notcher_PND-54_3_2017_web

Power Notcher PND-54 is a new device with pneumatic power source for cutting and dimpling the tube ends for easier brazing.  The result is an inspectable brazed joint with the best possible flow characteristics.

Collar sizes: 12, 14–16, 18, 22, 28, 35, 42 and 54 mm.

Standard machines

Collaring machine TEC-150

TEC-150-HD_new_webTEC-150 pipe collaring machine with Tube Measuring Table for butt-welded pipe branching was introduced in 2001 and has since proven its efficiency. The machine has been very successful and there’s more than 180 delivered units this far.

The TEC-150 offers operator friendly interface to produce collars up to 219,1 mm. At the fair T-DRILL will demonstrate TEC-150 with pipe measuring table that makes positioning very easy.

Collaring machine S-54

T-DRILL Collaring Machine S-54

Another effective collaring machine is the automatic S-54 for producing collars up 54 mm for brazed and welded joints. Typical applications include automotive engine cooling tubes. Other typical applications are house- and industrial air-conditioning tube joining. Both straight and bent tubes can be processed.

At the fair T-DRILL presents S-54 making collars on bent tubes which is one of the best application for this machine, especially in automotive engine cooling and exhaust recycling applications.

 

Standard machines

Collaring unit HFT-2000 SS

T-DRILL Collaring unit HFT-2000 SS for stainless steel pipesThe HFT (Hand Feed Table) is used in conjunction with the Portable T-DRILL T-65 SS collaring machine, which is manually moved by the operator after each produced collar. Featuring easy pin-to-hole positioning, the unit is highly productive in standard manifold production.

This system is capable of producing collars of 17–51 mm in run tubes of 32–114mm. With this collaring unit you can produce five 51 mm collars in less than ten minutes without moving the tube. The HFT-2000 SS is designed for stainless steel manifold production, but can be used even for copper tubes just by changing the tooling.

Chipless Cutting Machine TCC-28

T-DRILL TCC-28-RL + Coil Automatic Tube Cutting Center

A highly automated and accurate cut-off system TCC-25 is for chipless cutting of thin walled tubes. The machine is especially suitable for automotive brake and fuel tube cutting.

Other applications are aluminium and copper tube cutting within automotive and house/industrial air-conditioning applications.

Do you want to be the next success story?

Let’s leave your contact details and we will contact you


    Share on social media

    Contact us