Additional Information
Collar sizes:
Drilling/collaring/trimming: Ø12–58 mm | O.D. ½”–2 ¼”
Elliptical pilot hole:Ø17,2–60,3 mm | O.D. ¾”–2 ¼”
Drilling/collaring: Ø6–54 mm | O.D. ¼”–2 1⁄8″
Run tube sizes: Ø8–114,3 mm | O.D. 5⁄16″–4 ½”
Pipe material: Steel, Stainless steel, Aluminium, Copper, Copper-Nickel
Machine type: Industrial machines
Process: Collaring
Most commonly used in:
Improves the manifold/collector production efficiency.
AFT
Adding the Automatic Feed Table to S-56 Improves the manifold/collector production efficiency. The manifold with multiple collars can be processed automatically.
MFT
Adding the MFT to the T-DRILL S-56 collaring machine improves the manifold/collector production efficiency, enabling fast pipe positioning for the operator.
S-56 with Automatic Feed Table, AFT.
See how fast 13 collars can be made with Automatic Feed Table.
| S-56 | Value |
|---|---|
| Collaring range (Drilling/collaring/trimming) | Ø12–58 mm | O.D. ½"–2 ¼" |
| Collaring range (Elliptical pilot hole) | Ø17,2–60,3 mm | O.D. ¾"–2 ¼” |
| Collaring range (Drilling/collaring | Copper & Aluminium) | Ø6–54 mm | O.D. 1/4"–2 1/8" |
| Materials for work piece | Steel, Stainless Steel, Aluminum, Copper, CuNi |
| Diameter of run tube | Ø8–114,3 mm | O.D. 5⁄16"–4 ½" |
| Compressed air supply | 6 bar | 87 psi |
| Air consumption (basic machine only) | 55 l/min | 14.5 GPM |
| Rated power | 4 kW |
| Fuses | 16 A |
| Supply voltage | 200–240V / 400–480V 50Hz/60Hz, 3 Phase |
| Machine dimension H x W x D | 1991 x 800 x 1187 mm | 78" x 31" x 47" |
| Machine weight w/o electric cabinet | 536 kg | 1179 lbs |
Note! The above values are intended as a guidance only.
Share on social media
