TCC-28 RL & COIL
Diámetros de tubo: Ø4,76–28,6 mm | 0.187”–1.125”
Material del tubo: Aluminio, cobre, acero inoxidable, acero
Tipo de máquina: Máquinas industriales
Proceso: Corte
TCC-28-RL Y CENTRO DE CORTE DE TUBOS AUTOMÁTICO DE BOBINAS
Si necesita cortar tubos de bobina y de sistemas de carga de soporte para tubos de longitud recta, esta máquina es la mejor solución. Combina ambas capacidades en una sola máquina.
Los diámetros de tubo de 4,76 mm a 22 mm de varios materiales, como aluminio, acero inoxidable y tubos de conductos de freno pueden cortarse con cualquiera de los métodos, y los tubos rectos hasta 28 mm.
Las áreas de aplicación típicas son las industrias automotriz y de intercambiadores de calor, etc. donde se necesita una buena calidad de corte y una velocidad de producción superior.
Component Units:
- Pipe Uncoiling Unit: Efficiently uncoils pipes for seamless processing.
- Pipe Straightener Unit: Ensures precise alignment for accurate cuts.
- Rack Loader Unit: Streamlines material handling.
- Cutting Unit: Clean, chip-free cuts without circular saw blades.
- Pipe Sorter Unit: Organizes cut pieces effortlessly.
Advantages:
- Blade Life: No circular saw blades needed, resulting in longer blade life.
- Cost-Effective: Low cutting blade cost.
- Material Efficiency: No material loss between cuts.
- Clean Process: No chips, no need for a chip handling system.
- Washing Not Required: Clean cutting method eliminates the need for washing.
- High Productivity: Fast cycle time, up to ~3000 pieces per hour.
- Quiet Operation: Low operating noise level.
- End-Forming Option: Optional inline end-forming (38 hits) for added versatility.
- Waste Minimization: Systems available for waste material reduction.
- Global Reach: Over 500 TCC machine deliveries by T-DRILL worldwide.
INFORMACIÓN TÉCNICA
| Straigth lengths | Coiled tubing | |
|---|---|---|
| Materials | Copper, Aluminium, Steel, Stainless Steel, CuNi, Brass | Copper, Aluminium, Steel, Stainless Steel, CuNi, Brass |
| Minimum diameter | 6 mm / 1/4” | 1,5 mm / .060” |
| Maximum diameter | 50,8 mm / 2” | 22 mm / 1.125” |
| Minimum cut length | For very short cut lengths (less than 50 mm) Cut & Break system, which works for pipes up to ~Ø 20 mm 50 mm with Through cut 75 mm with Pull apart cut | For very short cut lengths (less than 50 mm) Cut & Break system, which works for pipes up to ~Ø 20 mm 50 mm with Through cut 75 mm with Pull apart cut |
| Cut length tolerance | ± 0,1 mm | ± 0,1 mm |
| Maximum wall thickness | 2,5 mm / 0.1” | 2,5 mm / 0.1” |
¡Nota! Los valores anteriores son solo indicativos.
