F-400 Flanging Machine


Spinning
: /Chamfering/42,4–420 mm, /Expansion/Copper/100–350 mm, /Flanging/42,4–420 mm
Spinning: /Chamfering/1¼”-16″ NPS, /Expansion/Copper/4″-13″, /Flanging/1¼”-16″
Pipe diameters: 42,4–419 mm / 1¼” – 16″ (NPS)
Machine type: Industrial machines
Process: End forming

Most commonly used in:

F-400 Flanging machine for both cold and hot forming

With T-DRILL F-400 Flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves you up to 40 % in both time and costs compared with traditional weld neck flange connections:

The flanging machine F-400 meets the most stringent requirements of pipe manufacturers working with large O.D. ranges. The machine is capable of both hot and cold forming within an O.D. range of 42,4–419 mm. The F-400 is also suitable for producing of flange pieces.

T-DRILL flanging method is approved e.g. by:
  • Det Norske Veritas
  • Germanischer Lloyd
  • Lloyd’s Register of Shipping (Carbon Steel etc.)
  • Lloyd’s Register of Shipping (CuN)i
  • Bureau Veritas
  • ASTM
Advantages when using T-DRILL Flanging machines:
  • Cut workshop costs by eliminating the need for welding and X-raying.
  • Reduce the need for working capital: no welding neck flange inventory or complex welding and X-raying equipment is required
  • Loose flanges save installation time by eliminating difficult bolt-hole positioning.
  • Provide precise results and constant high quality: no risk of weld or braze fractures
  • Capable of cold and hot forming both long and bent pipes with either smooth or grooved flanged surfaces.
  • Programmability makes them very easy to operate and practically maintenance-free.

F-400 Flanging Machine

 

Laipoituskokosuositukset F-200, F-400

F-400Value
Mains supply200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
Hz, 3-phase
Fuse Min 3 x 80, Max 3 x 125 A (200-240 V)
Min 3 x 40, Max 3 x 100 A (400-480 V)
Power supply15,5 kW
Air pressure87 psi *)


Air consumption20 l/min *)
Oxygen29psi - 72psi *)


PropaneMax 2 bar (200 kPa) *)

Hydraulic pressureMax 160 bar (2330psi)

Flanging rangeØ1¼'' - 16'' NS

Machine dimensions88''x64''x68'' (LxWxH)

Package dimensionsWooden case 132''x47''x85''
Wooden pallet 138''x75''x83''
Net weight9920 lbs

Gross weight10582 lbs (in wooden case)

ColourRAL 7032/3003

Note! Above values are intended as a guide only.

*) Required only with hot-forming system

F-400 Flanging Machine

 

T-DRILL F-400 Flanging Machine

Feel free to ask for more information:

Address

Country

Business Sector

HVAC

 HVAC Heating, Air Conditioning, Ventilation Refrigeration Water Heating Solar Panels

Automotive

 Engine Cooling Exhaust (Exhaust Circulation, Muffler, sensors) Brake and Fuel Air Conditioning Power Steering

Shipbuilding

 Naval Shipyard Civilian and Cargo Shipyard Repair Shipyard

Stainless Steel Enterprises

 Water Treatment Food, Dairy and Brewery Pharmaceutical and Chemical Industry Liquid Level and Flow Measurement Water Pumps/Boosters, Circulation

Plumbing and Mechanical Contractors

 Plumbing and Mechanical Contractors

Other

Position in the Company

Department

Message

Upload a file