Skip to main content

THE T-DRILL CERTIFICATION TEST

Certification of training is required to operate a T-DRILL tee forming unit by code and the engineering community.

The project engineer and/or inspector can require proof of certification to operate a unit. After completing the following test, a certification card is ready for printing. Your local representative provides onsite training and training material is available in the following links.

T-54c for copper and T-54c SST for stainless steel:

Training video for T-65 and T-34 portable tools:

THE T-DRILL CERTIFICATION TEST

Registration

1. T-Drill joints can be T-Drill Joints
2. T-Drill outlets can be performed on
3. When operating with a T-54c, annealing needs to be performed with what size and bigger runs (Mains)?
4. Can T-Drill outlets be performed on size-on-size applications?
5. When operating T-Drill outlets which type of lubricant can be used?
6. How to inspect a properly installed T-Drill joint?
7. The T-65 counter plate should be used above what size run (Mains)?
8. Should Size-on-Size outlets be annealed?
9. How to resharpen drill cores?
10. Metal rings that come with a T-54c unit are for?
11. Before starting to adjust the collaring heads, the forming pins need to be?
12. While the unit is pulling an outlet. Operator should:
13. The stock T-54c has the following nominal size range:
14. The PLUS 115 CU has the following nominal size range:

Result

/ 14

Please click here to download your certificate as a PDF file to print it out.

Test failed

/ 14

Please try again.

Please select one option.

TAKE YOUR PRODUCTIVITY TO THE NEXT LEVEL WITH
T-DRILL!

Contact our sales

© 2025 T-Drill Oy

Privacy policy

Cookie consent