Skip to main content

TCC-45 EF3

Pipe diameters: Ø6–25,4 mm | 0.236” – 1″

Pipe material: Aluminium, Brass, Copper, Copper / Nickel, Stainless steel, Steel

Machine type: Industrial machines

Process: Cutting, End forming (Max. 3 End forming hits)

1-3 endforming hits available
Ram force 8 tons, and ram stroke 40 mm (57”)
Equipped with standard “Manchester” tooling

TCC-45 EF3 CUTTING MACHINE WITH IN-LINE END FORMING

The TCC-45 EF3 is a heavy duty chipless tube cutting station with integrated hydraulic endforming.

The TCC-45 EF3 has been designed for automatic chipless rotary cutting, grooving and endforming. All three operations are made simultaneously, which eliminates tube handling from cut-off machine to stand alone endformer. This increases productivity and improves accuracy and quality. The system can be programmed for long, fully unmanned production batches.

The machine is equipped with three forming stations capable of producing most standard forms with a single tooling set-up: beads, O-ring beads, flares, hose couplings, expansion, reduction, etc.

The machine can process tubing from either straight lengths or from coil stock. It is equipped with a batch counter which turns the system off after the required number of cuts.

Most commonly used in:

HVACR  →
Automotive  →

Material efficiency

No material loss between cuts

Clean process

No chips, no need for a chip handling system or washing

Fast cycle time

Maximum ~ 3000 pcs / h

TECHNICAL DETAILS

Tube materialCopper, Aluminium, Steel
Max. diameter of the tube to be cutCopper, aluminum: Ø 22 mm | Ø 0.866’’
Steel: Ø 12,5 mm | Ø 0.5’’
Diameter of the tube to be cut and endformedCopper, aluminum: Ø6–22 mm | Ø0.236-0.866’’
Steel: Ø6–16 mm | Ø0.236'' - 0.63
Diameter of the endformed shapeMax. Ø 30 mm | Ø 1.18''
Tube lengthsWith simultaneous cutting and endforming: 40–915 mm | 1.57’’ – 36''
Endforming before cutting; 915–6,000 mm | 36'' – 236''
Wall thicknessCopper, aluminum: 0,.4–1,5 mm | 0.02'' – 0.06’’
Steel: 0,4–1 mm | 0.02'' – 0.04'
Compressed air supply6 bar = 600 kPa | 87 psi
Air consumption~ 650 l/min
Power supply7,5 kW
Main fuse3x63 A (380-480V) 3x80 A (200-240V)
Supply voltage200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase

Note! The above values are intended as a guidance only.

YOU MIGHT ALSO NEED

Here are some other products for cutting.