Additional Information
Collar sizes: 21,3–168,3 mm
Run tube sizes: 33,7–550 mm; Special model Ø800 mm
Pipe material: Aluminium, Copper, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring
The manual measuring table is used for controlled, accurate movements of the tube in both angle and axial directions. With the measuring table it is possible to specify accurately both the distance and the angle position between two collars or between the starting point and a collar.
There are two standard lengths available: 3000 mm and 6000 mm.
Tube Measuring Table 3000
Tube Measuring Table 6000
Capacity Chart for Maximum Run Tube Wall Thickness in mm (run tube size on the left and branch size on the top)
TEC-150 | Value |
---|---|
Material suitable for collaring | Iron, Stainless steel, Aluminium, Copper, Copper-Nickel |
Branch tube Ø by collaring method | 21,3–168,1 mm, option 219,1 mm (pilot hole for 219,1 collar is made separately) |
Run tube Ø by collaring method | 33,7–550 mm |
Smaller run/branch pipes are possible to fabricate by ball pull method; please contact T-DRILL Sales | |
Max. wall thickness | See cabability chart |
Mains supply | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
Fuse size | Max 3 x 63A |
Connected power | 5 kW |
Air pressure | 6–8 bar |
Air consumption | 50 l/min |
Machine dimensions | See the layout drawing |
Package dimensions | 1900 x 1350 x 2050 mm (L x W x H) |
Net weight | 1000 kg |
Gross weight | 1300 kg |
Noise level | Max 85 dB |
Note! Above values are intended as a guide only.
TEC-150 & positioning table for max 6000 mm long tubes
Fields marked with * are mandatory.