Additional Information
Pipe diameters: 1,5–22 mm, 8–50,8 mm | .060″ – 0.866”, 0,315″ – 2″
Pipe material: Aluminum, Copper, Stainless steel, Steel
Machine type: Industrial machines
Process: Cutting
Most commonly used in:
If you need to cut tubes from both coil and from rackloading systems for straight length tubes, this machine is the optimum solution, offering both capabilities.
With this machine you can cut straight tube diameters 6–45 mm (¼’’ – 0.866”) and coil tubes 1,5–22 mm (0.06” – 0.866’’) in a range of materials such as copper, aluminum, stainless steel.
Typical application areas are in automotive and heat exchanger industry, etc. where good cutting quality and superior production speed are needed.
| TCC-50 RL + Coil | Value |
|---|---|
| Mains supply | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
| Cutting range | From coil: Ø1,5–22 mm | Ø0.06'' – 0.866’’ Straight tubes: Ø6–45 mm | Ø0.236'' – 1.772'' |
| Wall thickness | From coil: 0,3–3 mm | 0.012'' - 0.12'' Straight tubes: 0,.4–2,5 mm | 0.016'' - 0.1'' (depending on the tube material) |
| Material | Copper, Aluminium, Steel, Stainless Steel, CuNi, Brass |
| Repeating accuracity | +/- 0.1 mm/stroke |
| Min. cut lengths | 3 x O.D. |
| Typical production rates | 800–2200 pcs/h depending on cut length, material and required cut quality |
| Main fuse | Min. 3 x 16A Maks.3 x 63 A |
| Noise level | 80 dBA |
Note! Above values are intended as a guide only.
Share on social media
