TCC-25 TPS Tube Processing System

Pipe material
: Copper
Machine type: Industrial machines
Process: Cutting, End forming

Most commonly used in:

TCC-25 TPS Tube Processing System

This special system is cutting copper tubing from coil. After cutting, one tube end becomes closed by spinning operation fully automatically.

The system consist of T-Drill standard TCC-25 Automatic Chipless Rotary tube cut-off machine. It takes the tubing from coil, straightens it and finally cuts to length. After that the tubes are guided to a single (= the leading tube end only) Tube End Spinning Station automatically.

Since TCC-25 is able to cut the tubes very fast into length, the spinning station incorporates two separate spinning units in order to increase rate of production.

TCC-25 TPS Tube Processing System


Diameter of the tube to be cut
O.D. Ø0.2'' - 0.4''

Wall thicknesses
0.016'' - 0.031''

Material of the tube

Material length range
5.9'' - 21.6''

Compressed air supply
87 psi

Connected power
5,8 kW

Fuses max.
3 x 63 A

Supply voltage
200-240 V / 50 Hz /60 Hz, 3-phase, 400-480 V / 50 Hz /60 Hz, 3-phase

Weight of the machine
2601 lbs

Note! Above values are intended as a guide only.

TCC-25 TPS Tube Processing System

TCC-25 TPS Tube Processing System

Feel free to ask for more information:



Business Sector


 HVAC Heating, Air Conditioning, Ventilation Refrigeration Water Heating Solar Panels


 Engine Cooling Exhaust (Exhaust Circulation, Muffler, sensors) Brake and Fuel Air Conditioning Power Steering


 Naval Shipyard Civilian and Cargo Shipyard Repair Shipyard

Stainless Steel Enterprises

 Water Treatment Food, Dairy and Brewery Pharmaceutical and Chemical Industry Liquid Level and Flow Measurement Water Pumps/Boosters, Circulation

Plumbing and Mechanical Contractors

 Plumbing and Mechanical Contractors


Position in the Company



Upload a file