T-110 Collaring Machine


Collar sizes
: 21,3–114,3 mm / ½”–4″
Run tube sizes: 33,7–323,9 mm / Ø1’’–12’’
Pipe material: Aluminium, Brass, Carbon steel, Copper, Copper / Nickel, Stainless steel, Steel
Machine type: Industrial machines
Process: Tee forming

Most commonly used in:

 T-110 Collaring machine

Transportable collaring machine is designed for welded tube connections for run pipes 1’’ – 12’’. The machine is 32’’ wide and the aim is to make it “easy to move” by manual- or motorized forklift.

The T-110 Collaring system consist of:
  • T-110 collaring machine
  • Pilot hole milling tool
  • Collaring tools (with forming pins+pin holder according to collar diameters
  • Trimming tool
  • Clamping tools according to run pipe diameters
  • Tool holders both side of the control panel.

The pilot hole tool, collaring tools and trimming tool are located at the tool holders both side of the control panel. The same tool holders can be used for tool setting. The buttons of the control panel are used to start and stop pilot hole milling, collaring and trimming cycles.

T-110 Working Cycle:
  • The operator mounts the tube inside the opened clamps.
  • The collar position is located and the clamps are closed by the operator.
  • The pilot hole tooling is mounted to the T-110 collaring machine by the operator and the elliptical pilot hole is milled according to the preset settings.
  • When the pilot hole is ready, the pilot hole tooling is replaced by the collaring tooling. Collar forming takes place.
  • When the collar is ready, the collaring tooling is replaced by trimming tooling. Trimming of collar takes place.
  • Finally trimming tool is removed from the T-110 collaring machine, clamps opened and the next collar can be positioned.

 

You might also need:

T-110 Collaring Machine

 

T-110
Value
Collar diameter
ؽ’’ – 4’’


Diameter of the run pipe
Ø1’’ – 12’’

Maximum wall thickness
Steel 0.20''; Copper 0.20''

Material to be formed
Aluminium, Copper, Stainless Steel, Steel

Sound level
Max. 78 dB

Measures of the unit
35.4''x31.1''x48.4'' (LxWxH)



Weight of the unit
551 lbs

Operating voltage
200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase

Fuses
16 A

Motor
2,2 kW

Note! The values above are intended as a guide only.

 

T-110 Collaring Machine

Layout Drawing of T-110

 

t-110_layout

You might also need

Feel free to ask for more information:

Address

Country

Business Sector

HVAC

 HVAC Heating, Air Conditioning, Ventilation Refrigeration Water Heating Solar Panels

Automotive

 Engine Cooling Exhaust (Exhaust Circulation, Muffler, sensors) Brake and Fuel Air Conditioning Power Steering

Shipbuilding

 Naval Shipyard Civilian and Cargo Shipyard Repair Shipyard

Stainless Steel Enterprises

 Water Treatment Food, Dairy and Brewery Pharmaceutical and Chemical Industry Liquid Level and Flow Measurement Water Pumps/Boosters, Circulation

Plumbing and Mechanical Contractors

 Plumbing and Mechanical Contractors

Other

Position in the Company

Department

Message

Upload a file