Additional Information
Collar sizes: 21,3–114,3 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring
T-DRILL SEC-100 Collaring machine is a combination of two modular T-DRILL units integrated to the same frame. The pilot hole cutter, collaring process and trimming of the branch are done fully automatically without manual intervention.
The machine is specially designed for any manifold production in pipe fabrication applications. With SEC-100 it is possible to collar carbon steel, stainless steel, copper and other alloys as well as thin-walled Hastelloy pipes. In addition to manifold manufacturing, machine fits well for manufacturing level detection for liquids or similar application in the food, dairy, chemical or pharmaceutical industries.
An automatic work cycle with simple pre-set tools make the SEC-100 ideal for both high volume and short-run production.
Capacity Chart for Maximum Run Tube Wall Thickness in mm (run tube size on the left and branch size on the top)
SEC-100 | Value |
---|---|
Operating voltage | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
Fuse | Max 3 x 63A |
Motor | 6,5 kW |
Air pressure | 600 kPa / 250 kPa (2,5 bar) |
Air consumption | 30 l/min, depending on the application |
Material to be collared | Aluminium, Copper, Stainless steel, Steel |
Collaring range | Ø21,3–114,3 mm |
Run tube diameters | Ø33,7–219 mm |
Measures of the machine | 1500 x 1145 x 2100 mm (L x W x H) |
Measures of the package | 3000 x 1900 x 2200 mm (L x W x H) |
Net weight | 2600 kg |
Gross weight | 3000 kg |
Colour | RAL 7032/3003 |
Note! The above values are intended as a guidance only.
Fields marked with * are mandatory.